schülke gigasept AF instrument disinfection (5L)
schülke gigasept AF instrument disinfection (5L)
Order schülke gigasept AF instrument disinfection (5L)
gigasept AF is an aldehyde-free disinfectant and cleaning preparation for surgical instruments, anesthetic accessories, etc.
Properties:
- aldehyde-free
- very good cleaning performance
- comprehensive microbiological effectiveness
- pleasantly fresh smell
- Shortened exposure time in the ultrasonic bath
Areas of application:
For the manual cleaning and disinfection of thermostable and thermolabile instruments of all kinds (except flexible endoscopes). Due to the excellent cleaning performance - especially in the ultrasonic bath - and the comprehensive microbiological effectiveness, gigasept instru AF offers all important product properties for instrument reprocessing in clinics and practices. Application: gigasept® instru AF is a concentrate and is diluted with cold water to the desired application concentration.
Dosage / application example:
Depending on the degree of efficiency 1.5% - 4%. 1 liter of a 3% working solution corresponds to 970 ml water and 30 ml gigasept® instru AF. Immerse endoscopes and instruments to be reprocessed in the gigasept instru AF solution immediately after use. Pay attention to complete wetting, also with hollow-bodied instruments, and allow to take effect. After cleaning the instruments thoroughly with water of at least drinking water quality, better with sterile distilled water. or rinse / rinse thoroughly with deionized water to completely remove residues of the cleaning solution. Please note the reprocessing recommendations of the instrument manufacturer. According to Krinko / BfArM recommendation, cleaning and disinfection must be carried out in separate work steps. Not suitable for the final disinfection of semi-critical and critical medical devices!
Service life:
A standing time of 7 days applies if the application solution is used exclusively for disinfecting previously cleaned instruments. If the application solution is used for cleaning, it must be replaced every working day and if contamination is clearly visible.
Ultrasonic cleaning:
gigasept instru AF is particularly suitable for use in ultrasound devices. The chemical stability of the product is given. Studies have shown that with gigasept instru AF very good cleaning can be achieved after just a few seconds. You can request corresponding reports from us. Do not heat the working solution above 40 ° C.
100 g solution contain the following active ingredients:
15.6 g coconut propylenediaminguanidine diacetate, 35 g phenoxypropanol, 2.5 g benzalkonium chloride. Marking acc. VO (EG) 648/2004: 5 - 15% non-ionic surfactants, fragrances. Contains N-dodecylpropane-1,3-diamine