Durgol forte strong decalcifying agent (1000ml)

• Very quick effect
• Visible and thorough cleaning
• Above-average descaling capacity (1 liter of durgol forte dissolves approx. 130 g of lime)
• ingredients
• AQUA, HYDROCHLORIC ACID, PHOSPHORIC ACID, COLORANT

application

Tiles, garden paths and terraces

• Removal of cement veils, i.e. Final cleaning by means of acidification as the last step when laying boards, after the grout has hardened, but also to remove limescale deposits or efflorescence: Wet joints and strongly absorbent boards well with cold water before starting. Dilute durgol forte 1: 3 (durgol: water), apply the solution evenly with a rag or brush and let it work for up to 5 minutes. Do not let dry. Scrub the surface thoroughly. Rinse immediately with plenty of cold water. Rinse the abrasive cloth or sponge frequently and always use clear water. Repeat application if necessary. Let it dry well. Larger areas in max. Process 4 m2 sections. 1 bottle of durgol forte of 1000 ml is sufficient for an area of ​​approx. 20 - 60 m2, depending on the pollution.
• Toilet bowls / urinals
• Removing heavy limescale and yellow stripes: approx. Add 3 dl durgol forte to the water content, leave to work for as long as necessary, brush through and rinse. With yellow stripes and particularly heavy deposits, allow durgol forte to soak in for up to 30 minutes using a soaked rag, then brush and rinse. If necessary, descale the cistern as well (Attention: If the cistern is provided with metal screws, please use durgol express instead of durgol forte).
• Flower pots
• Removing limescale: Moisten the clay pot well with cold tap water. Dilute durgol forte 1: 3 (durgol: water). Pour the solution into the pot up to the limescale edge and let it work for 30 minutes. To dissolve lime on the outside, place the pot in a larger container and proceed analogously. Then rinse thoroughly with cold water.