Buy durgol forte Strong Descaler Bidon (10 liters)

• Very fast effect
• Visible and thorough cleaning
• Above-average limescale dissolving capacity (1 liter of durgol forte dissolves approx. 130g of limescale)

Fields of application

• Removal of cement haze, i.e. final cleaning by means of acidizing as the last step in laying slabs, after the joint compound has hardened, but also removal of lime deposits or efflorescence: Wet joints and highly absorbent tiles well with cold water before starting. Dilute durgol forte 1 : 3 (durgol : water), apply solution evenly with cloth or brush and allow to act for up to 5 min. Do not allow to dry. Scrub surface thoroughly. Rinse immediately with plenty of cold water. Rinse scrubbing cloth or sponge frequently and always use clear water. Repeat application if necessary. Allow to dry thoroughly. Treat larger areas in sections of max. 4 m2. 1 bottle of durgol forte à 1000 ml is sufficient for an area of approx. 20 - 60 m2, depending on the degree of soiling.
• WC bowls / urinals: Removal of heavy limescale deposits and yellow streaks: Add approx. 3 dl of durgol forte to the water content, allow to act for as long as necessary, brush through and rinse. In the case of yellow streaks and particularly heavy deposits, leave durgol forte to act for up to 30 minutes using a soaked cloth, then brush and rinse. If necessary, also descale the cistern (Attention: Falls the cistern is equipped with metal screws, please use durgol express instead of durgol forte).
• Flower pots: Removal of lime scale: Moisten clay pot well with cold tap water. Dilute durgol forte 1:3 (durgol: water). Pour the solution into the pot up to the limescale rim and allow to soak for up to 30 minutes. To dissolve limescale on the outside, place the pot in a larger container and proceed in the same way. Then rinse thoroughly with cold water.