LABULIT Buy BioFlock (1 liter)

biodegradable flocculant, without aluminum

• Removes turbidity, removes oily cosmetic residues from water
• Removes phosphates and heavy metals
• Is NOT a hazardous substance, biodegradable, WITHOUT aluminum

Application

Can also be used with filter cartridges. Adjust pH value to 7.0 - 7.4. Always use the product immediately after disinfection!

Dosage

• As a preventive measure, if turbidity has not yet set in, every 2 weeks: 0.1 l/10 m³
• If turbidity is beginning, visible depth > 50 cm once: 1 l/10 m³
• In case of turbidity from visual depth < 50 cm once: 2 l/10 m³
• Dilute product before dosing (e.g. in a ratio of 1:10 in a watering can) then distribute along the edge of the pool or dose directly at a point with a good flow.
• In both cases, ensure good circulation for approx. 3 hours. On the following day (after approx. 24 hours), the flocs produced can be removed via the filter system. - At the same time it is advisable to use the vacuum cleaner.
• In case of large amounts of flocs formed, it is recommended to perform the filter backwash several times, e.g. at intervals of 2-3 hours.
• Flakes that have not been filtered out will rise to the surface after 2-3 days, from where they can also be removed with a close-meshed landing net.

Caution

In swimming pools with less than 30 cm of visible depth, the flocs formed can be removed only with very high filtering effort. In this Fall a water change is preferable