LABULIT Watcon Minus (3kg)

Product: ID38827 / EAN: 7612262060307

LABULIT Watcon Minus (3kg)

CHF 24.00 VAT included
Quantity

Available immediately | PostPac Priority More than 10 pieces in stock! Shipping: 1-2 business days
  Number of sales

This product has already been purchased 7-times

  Bonus system

CHF 0.48 will be credited to your bonus account (2%)

 Customer ratings and reviews
There are no reviews for this product yet.
Evaluate
Kanela ex swiss warehouse
Kanela purchase on invoice possible
Kanela free shipping from CHF 100.00
Kanela telephone consultation

LABULIT Buy Watcon Minus (3kg)

Immediately soluble acid granules for lowering too high pH in swimming pool water and whirlpool.

  • Immediately soluble acid granules to reduce excessive pH in swimming pool water.
  • based on sodium hydrogen sulfate.
  • Ideal pH value = 7.2 - 7.4
  • can also be used for sand filter cleaning.

Dosage swimming pool:

After filling the pool, always first reduce the alkali content to 100 ppm with hydrochloric acid 32%.

During the swimming season, if the pH level rises above 7.4:

  • per 0.1 pH unit = 75 g WATCON MINUS per 10'000 liters
  • First dissolve the calculated amount of WATCON MINUS in a bucket of water! Then slowly pour it into the water along the edge of the pool while circulating. Alternatively: Simply sprinkle the granules onto the water surface obwhile the circulation is running.
  • After 12 hours, check the pH value and if it is still too high, repeat the dosage as described at ob
  • Hard water needs more, soft water less WATCON MINUS

Calculation example based on an alkalinity of 100 ppm:

  • Gemessen pH value = 8.0, target value = 7.2
  • Correction by 0.8 pH units = 8 x 75 g = 600 g/10,000 liters

Dosage Whirlpool:

Falls the pH value is above 7.4, reduce to the ideal value of 7.2 with WATCON MINUS:

  • approx. 20 g WATCON MINUS for 1'000 liters, sprinkle directly into the water.
  • Faif necessary, add more until the pH value of 7.2 is reached.

WATCON MINUS for filter backwashing (= super cleaning) of the sand filter:

  • To clean the sand filter from strongly adhering dirt (and therefore reduce chlorine consumption), use WATCON MINUS approx. 3 - 4 times per bathing season.
  • During the filter backwash, add approx. 500 g of WATCON MINUS slowly (within approx. 2 minutes) to the skimmer.
  • The acid granulate dissolves the firmly adhering dirt, which is then removed via backwashing.

Remarks

  • WATCON MINUS tends to become hard (hygroscopic). This does NOT result in any loss of quality!
  • The crystal blocks can easily be broken up mechanically.
  • The pH value of the swimming pool water should be checked 1 - 2 times a week and corrected if necessary.

Im Moment gibt es keine Fragen zum Produkt,
Products from LABULIT